CBNLP - 16000/16 SERIES, INTERIOR-EXTERIOR (SUP DAT)

  • MSDS: CBNLP
  • Manufacturer: MCCORMICK PAINTS
  • Product Name: 16000/16 SERIES, INTERIOR-EXTERIOR (SUP DAT)
  • National Stock Number: 8010-00N071261
Product Identification

Product ID:16000/16 SERIES, INTERIOR-EXTERIOR (SUP DAT)
MSDS Date:12/15/1993
FSC:8010
NIIN:00N071261
MSDS Number: CBNLP

Responsible Party
MCCORMICK PAINTS
2355 LEWIS AVE
ROCKVILLE, MD 20851
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 301-770-3235

Cage: 0EKH6

Contractor
MCCORMICK PAINTS
ROCKVILLE, MD 20851 US

Telephone: 301-770-3235

Cage: 0EKH6

Ingredients

2 @ 68F

Fraction By Weight: 34%

OSHA PEL N/K

ACGIH TLV: 118 PPM (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HEADACHE, DIZZINESS, NAUSEA,
EYE IRRITATION. CHRONIC: LOSS OF APPETITE, NOSE BLEEDS. REPORTS
HAVE ASSOCIATED REPEATED AND PROLONGED OCCUPATIONAL OVEREXPOSURE TO
SOLVENTS WITH PERMANENT BRAIN AN D NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN CONTACT: PROLONGED OR REPEATED
LIQUID CONTACT WILL DRY AND DEFAT SKIN, LEADING TO IRRITATION AND
DERMATITIS. EYE CONTACT: DIRECT EYE CONTACT WILL CAUSE EYE
IRRITATION.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: IMMEDIATELY FLUSH WITH
PLENTY OF WATER FOR AT LEAST 15 MINUTES. CONSULT MD. INGESTION: DO
NOT INDUCE VOMITING. CALL MD. DRINK 1 OR 2 GLASSES OF WATER.
INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. CALL MD.

Fire Fighting

Flash Point Method:TCC
Flash Point:108F,42C
Lower Limits:1.0%
Extinguishing Media:USE FOAM, DRY CHEMICAL, WATER FOG, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER MAY BE HELPFUL APPLIED AS A SPRAY OR
MIST TO COOL CLOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. KEEP AWAY FROM HEAT, SPARKS, AND OPEN
FLAMES.

Accidental Release

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. KEEP PEOPLE AWAY.
REMOVE WITH INERT ABSORBENT. PROVIDE ADEQUATE VENTILATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTRS CLSD WHEN NOT IN USE.
AVOID CONT W/EYES & SKIN. AVOID OPEN FLAMES, SPARK SOURCES & HIGH
TEMP AREAS. DO NOT TAKE INTERNALLY.
Other Precautions:PROVIDE ADEQ VENT. KEEP OUT OF REACH OF CHILDREN.
THIS COATING CONTAINS MATLS CLASSIFIED AS NUISANCE PARTICULATES,
FOR EXAMPLE TITANIUM DIOXIDE, CALCIUM CARBONATE, ETC, WHICH MAY BE
PRESENT AT HAZ LEV ELS ONLY DURING SPRAYING OF (SUP DAT)

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED CANNISTER OR AIR HOSE
MASK IF TLV IS EXCEEDED. IF MATERIAL SPRAYED AND TLV NOT EXCEEDED,
USE NIOSH/MSHA APPROVED DUST MASK.
Ventilation:VENTILATE WORKING SPACES TO BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA . USE CHEMICAL-RESISTANT APRON OR OTHER (SUP
DAT)
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING BATHROOM.
Supplemental Safety and Health
TRADE NAME/PART #: ARCHITECTURAL GLOSS ENAMEL. OTHER PREC: THIS
COATING, OR SANDING OR ABRADING OF THE DRIED FILM. OTHER PROT
EQUIP: CLOTHING IF NEEDED TO AVOID REPEATED OR PROLONGED CONTACT.

Chemical Properties

Boiling Pt:B.P. Text:>318F,>159C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER
Percent Volatiles by Volume:52

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, OPEN FLAMES, SPARKS.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, AND
SMOKE.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.